Is a rapid setting cementitious wall and floor tile adhesive. It is suitable for internal and external use and is unaffected by extreme hot and /or cold weather.
Quickset fast-setting cementitious adhesive has unique properties which makes it ideal for use with ceramics, mosaic and natural stone tiles.
Quickset fast-setting cementitious adhesive is a modified cement based product with increased bonding strength and enhanced performance. It adheres to most common building substrates, including concrete, sand/cement render, screeds, bricks and block work.
Use a floor trowel (notches 10mm x 10mm at 6mm interval) spread only enough so that the area can be tilled within 10minutes .The above notched trowel will spread enough adhesive to apply the recommended minimum adhesive bed for floor tiling which is 5mm. As a guide line 1×20 kg bag will cover approximately 4 square meters.
Use a wall trowel (notches 6mmx 6mm at 6mm interval) spread only enough adhesive so that the area can be tilled within 10minutes.The above –notched trowel will help spread enough adhesive to apply the recommended minimum adhesive bed for wall tiling which is 3mm. As a guide line 1x20kg bag will cover approximately 6 squre meters.
It is a non-hazardous material but take care to avoid dust inhalation and eye care/skin contact.
1. Allow at 24 hours before grouting can commence
2. Ensure that all adhesive is removed from the joints
3. Grout with Quickset tile grout.
1. Initial setting 6 hours
2. Final setting 24 hours
3. Correction time 25 minutes
4. Open time 15 minutes
5. Store in a dry are free from moisture
6. Shelf life 9 months
7. Packaging 20kgs
1. Empty contents into a suitable container and slowly add 5 liters of cold water
2. Mix to a creamy consistency
3. Do not add more water